Meer dan 7500 artikelen uit voorraad leverbaar
Laagsteprijsgarantie
Uw partner voor astronomie
Artikelnummer: 72160

Montering RST-300

korte termijn
Klaar voor verzending in 3-5 weken + verzendtijd

Productomschrijving

Helaas is deze beschrijving nog niet in het Nederlands vertaald. U vindt hier dus een Engelse artikelbeschrijving.

Although the payload capacity is 30kg (maximum 50kg), the weight of the mount is only 8.5kg.

It weighs about 35% compared to our worm gear mount and is less than 20%, if we include the counterweight.

Counterweights not required up to 30kg!

You can prevent accidents by the observer or guest from hitting the counterweight.

Since there is no need for a weight bar, it is good for wide use of a narrow observation room.

When two telescopes are mounted side by side, it is difficult to balance left and right, but using the RST-300 does not have such difficulties.

You don’t need to rebalance if you change accessories like a camera or guide scope.

Instead of worm gears, a new type of reducer called strain wave gear (harmonic drive) is used.

Almost no backlash and no maintenance is required. As it is widely used in industrial robots, it is very durable.

The RA axis has a built-in brake system. When the mount power is off, the brake is activated to prevent the “back drive” phenomenon.

“Back drive” refers to the phenomenon that the shaft rotates in the direction of gravity when the power of the strain wave gear mount is turned off.

CNC machined aluminum alloy AL6061 is used for aircraft. That’s why it’s small, light and stiff.

WiFi is built in. You can control the mount via the SkySafari App on your smartphone.

ASCOM Driver can be connected via WiFi as well as USB. GoTo and AutoGuide are now wireless.

GPS receiver is built in. The position and time of the observer can be entered accurately and conveniently.

There is a built-in home sensor to find the mechanical origin. This is useful for permanently using Star Alignment data.

Build an ultra-small remote observatory with the RST-300 mount.

Counterweights Not Required.

  • Only 8.5kg weight
  • Capacity 30kg (max 50kg)
  • Strain Wave Gear (Harmonic Drive)
  • Built-in brake (RA Axis)
  • Hand controller (Hubo-i SE)
  • Cable for hand controller
  • USB cable
  • Power cable (Cigarette Lighter Plug)
  • Power cable (5.5×2.1 DC Jack)
  • AC-DC power adapter
  • Adapter for PoleMaster
  • Soft case
  • 5mm Hex Wrench

Specificaties

Capaciteit


Max. Draagvermorgen (kg)
30
Motor type
Servo motoren
Poolafstelling (°)
0-90
Stroomvoorziening
12 (DC)
Stroomverbruik (mA)
4.0
Stroomverbruik in open circuit (mA)
0.4
Tracking snelheden
solar, lunar, sideral
Type aandrijving
Harmonic / Strainwave

Bijzonderheden


Handcontroller
ja
GPS
ja (geïntegreerd)
GoTo systeem
ja
Poolas schaal
ja
Kortsluitings beveiliging
ja
Bestuurbaar via PC
ja (ASCOM)
PC interface
ja

Uitrusting


Stroomvoorziening
ja
Kabel
USB
Transporttas
ja
cigarette lighter socket
ja
Poolzoeker
nee
Statief
zonder statief

Algemeen


Ontwerp
Equatoriaal
Type
Montering
Kleur
zilver
Totaal gewicht (kg)
8,5
Materiaal
geanodiseerd aluminium
Lengte (mm)
183
Breedte (mm)
175
Hoogte (mm)
279

Aanbevolen accessoires

Telescoop accessoires > Stroomvoorziening & kabels (3)

Omegon Powerbank 38k 144Wh 12V

$ 189,00*
Monteringen & toebehoren > Statieven (3)
Statief

Rainbow Astro Statief CYG54GRDL Center Column RST-135 & RST-300

$ 5.100,00*
Monteringen & toebehoren > Andere (3)
Tegengewicht

Rainbow Astro Tegengewicht Gegengewichtsstange für RST-300 Montierung

$ 236,00*

*Alle prijzen zijn inclusief BTW + verzendkosten.

Rainbow Astro Montering RST-300
Rainbow Astro Montering RST-300
Rainbow Astro Montering RST-300
Rainbow Astro Montering RST-300
Rainbow Astro Montering RST-300

Klantbeoordelingen

Er zijn nog geen beoordelingen voor dit product.

Stel uw eigen beoordeling samen:

Heeft u specifieke vragen over uw bestelling of producten? Neem dan contact op met onze klantenservice!

Klanten die dit product kochten, kochten ook...