Winkelwagen
is leeg

Home > Telescoop accessoires > Focusers > Motoren & sturingen > Lunatico > Seletek > Lunatico Steuerung mit Motor Seletek Limpet Kit

Lunatico Steuerung mit Motor Seletek Limpet Kit

Artikelnummer: 64746
Fabrikant: Lunatico

$ 338,00

incl.btw
Dit product is verkrijgbaar in de volgende varianten:
Geschikt voor Optiek Prijs
Baader Steeltrack Diamond $ 338,00
Celestron SC 11 $ 338,00
Celestron SC 6, SC 8 & SC 9.25 $ 338,00
Skywatcher BD (Black Diamond) $ 338,00
Skywatcher Esprit $ 338,00
Lunatico Steuerung mit Motor Seletek Limpet Kit
Lunatico Steuerung mit Motor Seletek Limpet Kit
Lunatico Steuerung mit Motor Seletek Limpet Kit
Productomschrijving
Specificaties
Klantbeoordelingen
Aanbevolen accessoires

Beschrijving:

Helaas is deze beschrijving nog niet in het Nederlands vertaald. U vindt hier dus een Engelse artikelbeschrijving.

The Seletek LIMPET kit is composed of:

The Seletek Limpet is the smallest and most recent Seletek.

With the Limpet you can:

  • Control one focus motor
  • Control one rotator motor
  • Independent control of any controller pin, manual or automated (depending on temperature delta), useful not only for fan control but also for dew heater bands.
  • Control of the VSI's "Zerotator"
  • "Seletek à la carte" allows you to customize your Seletek (original or Armadillo or Limpet) to match you specific needs

Focuser controller from:

  • any astronomy program (ASCOM and INDILib drivers available)
  • your smartphone
  • your computer's web browser

Some features:

  • Central hole to easily attach the Limpet to the telescope using a single screw
  • Wifi and USB connection
  • Very low power requirements (30mA idle connected to wifi, 530mA focusing with our standard motor)
  • Optional external wifi antenna needed if the wifi signal is weak - if the wifi access point is in the observatory it won't be necessary
  • Optional external temperature sensor
  • All the time-proven Seletek Armadillo and Platypus software will work with it. Just one device at any time.
  • Including a screw locking 2.1x 5.5mm jack for safe attachment of power cable
  • 5.5 / 2.1mm standard jack, centre positive, 12V dc (13.8V as supplied by some batteries is valid)
  • ASCOM and INDILib enabled

The Limpet includes the power supply cable, with screwed on terminal, and a tripod thread screw. With a small 12V battery and the wifi interface, no cables coming out of the telescope!

Aanbevolen accessoires:

 
accessoire details
06.06.2020
Verzending in Nederland en België vanaf 4,90 €
Valuta
Contact